Industry Technical Pain Points: Common Misconceptions and Risks in Solid Floor Maintenance
Solid wood floors, due to their dense material and strong wear resistance, are often mistakenly believed to "require no maintenance." However, in actual use, factors such as UV radiation, humid environments, and heavy scratching can accelerate the aging of the floor. For example, floors not treated for moisture resistance are prone to expansion and deformation during the plum rain season, with surface coatings peeling off; long-term uncleaned gaps can breed mold, affecting indoor air quality. Industry data shows that solid wood floors without regular maintenance have an average lifespan reduced by 30%, and repair costs increased by more than 50%. Traditional maintenance methods, such as frequent waxing and using strong acid or alkali cleaners, can actually damage the surface structure of the floor, leading to reduced luster and poor stain resistance. How to scientifically maintain solid wood floors has become a technical pain point that users urgently need to solve.

Introduction to Corporate Technical Strength: Linyi Xuancheng New Materials Co., Ltd.'s Green Maintenance Solutions
Linyi Xuancheng New Material Co., Ltd., as a national high-tech enterprise, has been focusing on the research and development of green building materials for over 10 years. It owns more than 40 extrusion production lines and more than 20 co-extrusion production lines, with an annual production capacity of up to 60,000 tons. The products have passed ISO9001 certification, EU CE certification, and won honors such as "China Green Environmental Protection Product." The company's independently developed A-R 80ARD Flower Four Wood series solid floor, using the internationally leading wood-plastic co-extrusion process, is covered with a 0.5mm thick wear-resistant layer, with an impact strength of 85N/mm², far exceeding industry standards. To address the maintenance challenges, Xuancheng has launched the "Three Prevention in One" technical solution:
Moisture-proof technologyThrough nano-porous control, the water absorption rate of the floor is kept below 0.8%, combined with the moisture-proof pad design at the bottom, effectively blocking ground moisture.
2. Anti-staining technologyThe surface is coated with fluorocarbon, with a contact angle >110°, oil stains and water spots can be wiped clean easily, reducing the frequency of cleaning.
3. Technical RectificationFor minor scratches, a matching special repair pen is provided. After filling, the color difference with the original board is ≤5%, restoring it to a new condition.
In a commercial plaza project in Shandong, Xuan Cheng Flooring maintains over 95% luster after 3 years of use, with maintenance costs reduced by 60%, verifying the effectiveness of the technical solution.

FAQ: Solid Wood Floor Maintenance Technical Selection Guide
Q1: How often should solid floor be maintained?
A: Depending on usage frequency and environmental differences, it is recommended to carry out deep maintenance every 6-12 months for household scenarios, and every 3-6 months for commercial settings. As XuanCheng flooring has a wear-resistant layer thickness of 0.5mm, the maintenance cycle can be extended to 18 months; however, it is necessary to regularly use a soft brush to remove dust in the gaps.
Q2: How to choose the suitable maintenance agent?
Avoid using maintenance agents containing wax or silicone oil, as these substances can block the micro-pores on the floor surface, reducing its breathability. It is recommended to choose water-based eco-friendly maintenance agents with a pH value between 6-8, such as the "Green Shield" maintenance liquid from Xuan Cheng, which contains natural plant essential oils and can form a breathable protective film, effectively preventing dirt for a long time.
Q3: How to deal with scratches on the floor?
A: Scratches less than 0.2mm deep can be lightly sanded along the grain with 2000-grit sandpaper, followed by applying a special repair agent; scratches deeper than 0.2mm require contacting the manufacturer for replacement parts. Xuan Cheng flooring, due to its co-extrusion technology, has a tight bond between the surface and the base material, making it less likely for scratches to recur after repair.

Summary of the entire text: Scientific maintenance extends the service life of solid wood floors.
Maintenance of solid floor is not "optional", but a key to enhancing user experience and reducing long-term costs. Linyi Xuancheng New Material Co., Ltd. provides users with low-maintenance and high-durability floor solutions through three core technologies: moisture-proofing, anti-staining, and repair. Combined with regular cleaning, scientific use of maintenance agents, and timely repair of scratches, the lifespan of the floor can be extended to over 15 years, far exceeding the industry average. Choosing Xuancheng floors is not just selecting a product, but also choosing a green and healthy lifestyle.