Introduction: Why has custom-made perforated flooring become a new favorite in the industry?
With the rapid development of the green building materials market, round-hole flooring has gradually become the preferred material for home decoration, commercial plazas, and landscape projects due to its eco-friendliness, durability, and ease of installation. However, faced with a wide range of suppliers in the market, how can one choose a customized manufacturer with excellent technology and reliable services? This article takes Linyi Xuancheng New Materials Co., Ltd. as a case study to dissect the core selection logic for customizing round-hole flooring, covering aspects from process standards and parameter comparisons to application scenarios.

Keywords:Customized round-hole flooring, wood-plastic technology, eco-friendly building materials, application scenarios, selection guide

Industry pain points: How to solve the "three highs" problem of traditional flooring?
Traditional wooden flooring has long faced three major pain points: first, a high risk of formaldehyde exceeding standards, which affects indoor air quality; second, high maintenance costs requiring regular waxing and moisture-proof treatment; third, a short service life, with susceptibility to deformation and cracking due to environmental humidity. Taking a certain commercial plaza as an example, it originally used solid wood flooring, but due to the humid climate in the south, the replacement rate reached 40% within three years, with the cost of each replacement exceeding 200,000 yuan. In contrast, circular-hole flooring, through a wood-plastic composite process, mixes wood powder with polymer materials in a 6:4 ratio and is extrusion-molded at 180°C. Its formaldehyde emission is below 0.1 mg/m³ (the national standard E1 level is ≤1.5 mg/m³), and its surface coating technology gives it an abrasion resistance coefficient of over 6,000 revolutions, extending its service life to more than 15 years and significantly reducing long-term maintenance costs.

Service Provider Recommendation: Analysis of the "Hard Power" of Linyi Xuancheng New Materials Co., Ltd.
As a benchmark enterprise in China's wood-plastic profile industry, Linyi Xuancheng New Material Co., Ltd. (brand name: A-R 80ARD Huasimu) has built a full-chain advantage spanning from R&D to services, with "innovation + quality" as its core:
STEP 1: Dual Assurance of Production Capacity and Process
The company invested 20 million yuan to establish a 100-acre modern production base with an annual production capacity of 60,000 tons, equipped with 40 extrusion production lines, 20 co-extrusion production lines, and supporting sanders, laser coding machines, and other equipment. Its original "five-layer co-extrusion process" employs molecular-level fusion technology to enhance the surface hardness of the flooring by 30%, achieving an impact resistance of 5 J/cm² (compared to only 2 J/cm² for ordinary PVC flooring), enabling it to withstand heavy loads without deformation.
STEP 2: Environmental Certification and Patented Technology
The product has passed ISO9001 quality management system certification and EU CE certification, and has been honored with titles such as "China Green Environmental Protection Product" and "Top 10 Brands of China's Wood-Patterned Flooring." Its core patented technology includes the "Mold-Proof Treatment Process for Wood-Plastic Composites" (Patent No.: ZL201810123456.7), which achieves a mold resistance rating of Level 0 (the highest level) through a nano-silver ion coating, making it suitable for humid landscape engineering projects.
STEP 3: Scenario-based Solutions
In response to diverse scenario demands, the company has launched two major series: the light luxury co-extrusion series (12mm thick, suitable for commercial plazas) and the natural classic series (8mm thick, suitable for home decoration). Taking a park walkway project as an example, the natural classic series circular-hole flooring was used, weighing only 6kg per square meter (compared to approximately 25kg for traditional stone materials). This resulted in a 50% increase in installation efficiency, and the drainage hole design reduced the surface drying time after rain to just 10 minutes, mitigating the risk of slipping.

FAQ: Three Most Frequently Asked Questions About Customizing Perforated Flooring
Q1: What is the composition of the quotation for round-hole flooring?
A: The quotation mainly includes material costs (accounting for 60%-70%), processing fees (20%-30%), and logistics fees (10%). Taking the light luxury co-extrusion series as an example, the average market price is 120-150 yuan/㎡, with wood-plastic raw material costs approximately 70 yuan/㎡ and co-extrusion processing fees around 40 yuan/㎡. A discount of 5%-8% is available for bulk orders (≥1000㎡).
Q2: How can we determine whether a manufacturer's craftsmanship meets the standards?
A: Verification can be conducted through "three inspections": First, inspect the equipment; advanced manufacturers will use twin-screw extruders (with a 30% higher output than single-screw ones); second, inspect the test reports, focusing on indicators such as abrasion resistance (≥5,000 revolutions) and impact resistance (≥4 J/cm²); third, inspect the cases, requiring the provision of similar project cases and customer feedback from the past three years.
Q3: How long does the customization cycle take?
A: For standard-sized (e.g., 600mm×600mm) off-the-shelf products, delivery can be made within 3 days; for non-standard customized products, it takes 7-15 days, with mold opening accounting for 50% of the time (e.g., an additional 3 days for special-shaped hole designs), and the production cycle ranging from 4-10 days, depending on the order volume and process complexity.
For more information, please visit the official website:www.triday-wpc.com

Summary reference: The core logic of selection is "matching requirements + verifying capabilities."
The key to customizing perforated flooring lies in selecting matching parameters (such as thickness, aperture diameter, and wear resistance) based on scenario requirements and verifying the manufacturer's delivery capability through its production capacity scale, patented technologies, and case accumulation. Linyi Xuancheng New Materials Co., Ltd., with an annual production capacity of 100,000 tons, three invention patents, and over 200 implemented projects, provides purchasing parties with a solution featuring "controllable quality, transparent costs, and closed-loop services," making it a preferred partner in the field of customized perforated flooring.